Charcoal briquettes burning on a grill

Briquette Press Machine Guide: Charcoal and Wood Briquettes

November 19, 2026•4 min read

A briquette press packs loose material into dense blocks or logs that burn longer and are easier to store, ship and sell than the raw material. Which press you need depends on what you have. For sawdust and other dry wood waste, a screw press such as our MKBS02 makes solid fuel logs without additives. For charcoal powder, coal dust or coke dust, a charcoal briquette press shapes the powder into briquettes at 1 to 30 tons per hour.

Briquettes or pellets?

Pellets

Briquettes

Size

About 6 to 8 mm across

Much larger blocks or logs

Burned in

Pellet stoves and boilers with automatic feeding

Wood stoves, fireplaces, hand-fed boilers, grills (charcoal)

Machine

Pellet mill

Briquette press

Good fit when

Your buyers have pellet stoves or boilers

Your buyers burn wood or charcoal, or you have charcoal fines to sell

Many producers make both from the same sawdust. Our biomass pellet machine guide covers the pellet side.

Choose the type of press

Your material

Press

How it binds

Sawdust, shavings and dry ground biomass

Screw press

Heat and pressure, no additives

Charcoal powder and fines

Charcoal briquette press

Mixed with a binder before pressing

Coal dust, coke dust, clay and other mineral dust

Charcoal briquette press

Mixed with a binder before pressing

Screw press for sawdust briquettes

A screw press pushes dry, fine sawdust through a heated barrel. The heat and pressure soften the lignin in the wood, which glues the briquette together without any binder. The result is a dense fuel log, usually with a hole through the middle.

Model

Output

Power

Price

MKBS02

660 to 770 lb/hr

22 kW motor and 6 kW preheating

$9,479

To get good briquettes:

  • Dry the sawdust. Screw presses work best with dry material, roughly 8 to 12% moisture. Wet sawdust makes cracked, weak logs.

  • Grind it fine. Run chips and coarse material through a hammer mill first.

  • Keep it clean. Sand and stones wear the screw quickly.

Screw press logs can also be carbonized in a kiln afterwards to make charcoal logs.

Charcoal briquette press

Charcoal powder does not hold together on its own. Producers usually mix it with a binder, most often starch, and a little water, then press it and dry the fresh briquettes. Our MKBC presses also handle coal dust, coke dust, clay and other mineral dust.

Prices as of November 2026:

Model

Output

Power

Price

MKBC02

1 to 2 tons/hr

5.5 kW

$8,653

MKBC04

4 tons/hr

7.5 to 15 kW

$14,054

MKBC06

6 tons/hr

11 to 18 kW

$19,671

MKBC08

8 tons/hr

15 to 22 kW

$28,859

MKBC10

10 tons/hr

18.5 to 30 kW

$41,518

MKBC15

15 tons/hr

30 to 45 kW

$51,241

MKBC20

20 tons/hr

55 to 75 kW

$122,964

MKBC30

30 tons/hr

75 to 90 kW

$147,561

Even the smallest model presses 1 to 2 tons an hour, so size the press to how much powder you can supply and dry each day, not only to the press itself. Domestic shipping starts at $399.

Plan the rest of the line

Sawdust briquettes

Charcoal briquettes

1. Crush logs and branches in a wood crusher

1. Carbonize the wood, shells or other biomass in a kiln

2. Grind fine in a hammer mill

2. Grind the charcoal to powder in a hammer mill

3. Dry to roughly 8 to 12% moisture

3. Mix the powder with binder and water

4. Press in the screw press

4. Press in the charcoal briquette press

5. Let the logs cool, then pack them

5. Dry the briquettes, then pack them

Our hammer mill guide explains how to choose the grinder for either line.

Frequently asked questions

Do I need a binder? Not for sawdust in a screw press, because heat and pressure bind the wood. Charcoal powder needs a binder, usually starch.

Can I make grilling charcoal from sawdust? Yes, in two ways. Carbonize the sawdust and press the powder with a binder, or press sawdust logs first and carbonize them in a kiln.

What moisture should the material have? For a screw press, dry sawdust at roughly 8 to 12%. For charcoal briquettes, the binder and water are added during mixing and the briquettes are dried after pressing.

Which is the better business, briquettes or pellets? It depends on your buyers. Pellets sell to people with pellet stoves and boilers. Briquettes sell for wood stoves, fireplaces, grills and hand-fed boilers.

How much does a briquette press cost? Our screw press is $9,479, and charcoal briquette presses run from $8,653 for the MKBC02 to $147,561 for the MKBC30, before shipping.

Watch it done

Get help choosing

Tell us your material, how many tons a day you can supply, its moisture and who will buy the briquettes, and we will recommend the press and the machines around it. See what to prepare for a quote.

Related equipment and guides

Back to Blog