Close-up of wood shavings ready for grinding

Hammer Mill Guide: How to Choose One for Wood and Feed

November 19, 2026•5 min read

A hammer mill grinds grain, straw, wood chips and other dry material into small particles. Hammers on a fast-spinning rotor beat the material until it is small enough to pass through a screen, so the screen you choose sets the particle size. In a pellet line, this is the step that decides how well your pellets hold together. To choose a hammer mill, look at three things: what you are grinding, the screen size your pellets need, and the output in pounds per hour compared with your pellet mill.

How a hammer mill works

Material drops into the grinding chamber and meets a set of hammers turning at high speed. The hammers break it apart until the particles are smaller than the holes in the screen and fall through. A finer screen gives smaller particles and less output per hour. A coarser screen gives larger particles and more output.

Some of our larger models, such as the MKH420C-C and MKH500C-C, add a centrifugal fan that pulls the ground material out of the mill. That keeps light material such as straw and sawdust moving.

Hammer mill or wood crusher?

Your material

Machine

Why

Logs, branches and slabs

Wood crusher

Chips the wood and then grinds it to sawdust in one machine

Wood chips and shavings

Hammer mill

Reduces chips to the particle size the pellet die needs

Grain and corn

Hammer mill

Fine, even grind for feed

Straw, hay and grass

Hammer mill

Feed it slowly, because light material fills the chamber fast

Sawdust that is already fine

Often none

Screen it and grind only the oversize pieces

Choose the screen size

The particles have to be smaller than the holes in your pellet die. A good starting point is a screen about 1 mm smaller than the pellet diameter, such as a 5 mm screen for 6 mm pellets. Go finer for feed and stemmy forage, where small particles help the pellet bind. Our alfalfa and hay pellet guide starts at about 3 mm for hay.

Pellet size

Starting screen

3 to 4 mm (rabbits and poultry)

2 to 3 mm

6 mm (wood pellets, sheep and goats)

3 to 5 mm

8 mm and up (cattle and horses)

5 to 6 mm

If the pellets crumble, grind finer. If output drops too much, try the next screen size up. The MKH158B comes with screen options from 1.5 to 10 mm.

Dry the material first

Hammer mills grind dry material best. Wet material sticks to the screen and slows the mill down. Our MKH420C-C and MKH500C-C are rated for material with up to 30% moisture, but pellets need about 10 to 15%, so plan a drying step before or after grinding. Our biomass pellet machine guide explains how to dry wood and other biomass.

Compare models

Electric hammer mills at November 2026 prices. Rated output changes with the material and the screen: grain grinds fastest, while wood and straw grind slower.

Model

Power

Rated output

Price

Notes

MKH158B

1.5 kW

220 to 440 lb/hr

$1,338

Compact, screens from 1.5 to 10 mm

MKH198B-C

4 kW

660 to 880 lb/hr

$2,935

Small farms and feed lines

MKH420C

11 kW

660 to 880 lb/hr

$3,951

Heavier build for daily use

MKH420C-C

11 kW

660 to 880 lb/hr

$5,006

With centrifugal fan

MKHM500C

22 kW

Up to 3,300 lb/hr

$6,870

500 mm grinding chamber

MKH500C-C

22 kW

1,980 to 3,300 lb/hr

$7,281

With centrifugal fan

For logs and branches, our wood crushers chip and grind in one pass:

Model

Power

Rated output

Price

MK-FSD400

7.5 kW

660 to 1,100 lb/hr

$7,985

MK-FSD600

15 kW

880 to 1,320 lb/hr

$10,940

MK-FSD800

30 kW

1,760 to 2,200 lb/hr

$18,816

See every model in our hammer mill and wood crusher collections. Domestic shipping starts at $399.

Match the hammer mill to your pellet mill

The hammer mill has to keep up with the pellet mill on your material, not just on grain. Choose one rated above your pellet mill's output, so it still keeps up with a finer screen or a material that grinds slowly.

Pellet mill

Pellet output

Hammer mill

MKFD150B

Up to 330 lb/hr

MKH158B

MKFD200B or MKFD200P

Up to 485 lb/hr of feed

MKH198B-C

MKFD230B or MKFD260C

Up to 660 to 880 lb/hr of feed

MKH420C or MKH420C-C

MKFD300B or MKFD400RB

Up to 1,320 to 1,760 lb/hr of feed

MKH500C-C or MKHM500C

Ring die mills

1,100 lb/hr and up

MKH500C-C or MKHM500C, or two mills for the largest

For logs and branches, put a wood crusher in front of the hammer mill.

Keep it running

  • Remove metal, stones and twine before grinding. A magnet at the inlet catches loose metal.

  • Feed evenly. Overfeeding stalls the motor and heats the screen.

  • Check hammers and screens for wear. Worn hammers grind slower and use more power.

  • Clean up fine dust around the mill, because it burns easily.

Frequently asked questions

What screen size do I need for wood pellets? Start with a screen about 1 mm smaller than the die hole, such as 5 mm for 6 mm pellets, and adjust by how the pellets come out.

Can a hammer mill turn wood chips into sawdust? Yes. Dry chips grind well in a hammer mill. For branches and logs, use a wood crusher first.

Can I grind wet material? Wet material clogs the screen and grinds slowly. Dry it first when you can.

What size hammer mill do I need? One rated above your pellet mill's output on your material. Wood and straw grind slower than grain.

Can one hammer mill grind feed and wood? Yes, with a thorough cleanout between the two jobs.

Watch it done

Get help choosing

Tell us your material, its moisture, the pellet size you want and the pellet mill you have or plan to buy, and we will help you size the hammer mill. See what to prepare for a quote.

Related equipment and guides

Back to Blog